Israeli plug, two poles
Standard SI 32 part 1 - 10 A/250 V
Mandatory as of September 28, 2006
VALID IN THIS COUNTRIES |
---|
![]() |
Rubber leads:
black (other colours on request)
APPROVAL SYMBOLS | |
---|---|
A depiction of the Israeli symbol is only permitted upon the prior approval of the responsible authorities. |
LEADTYPES IN USE AND CROSS-SECTIONS IN MM² | |||
---|---|---|---|
H03VVH2-F | 2 x 0,75 | ||
H05VVH2-F | 2 x 0,75 | 2 x 1,0 | |
H03VV-F | 2 x 0,75 | ||
H05VV-F | 2 x 0,75 | 2 x 1,0 | 2 x 1,5 |
H05RR-F | 2 x 0,75 | 2 x 1,0 | 2 x 1,5 |
H05RN-F | 2 x 0,75 | 2 x 1,0 | |
H07RN-F | 2 x 1,0 | 2 x 1,5 | |
H05BQ-F | 2 x 0,75 | 2 x 1,0 | |
H07BQ-F | 2 x 1,0 | 2
x 1,5 |
|
H05BBF | 2 x 0,75 | 2 x 1,5 |
CONFIGURATIONS |
---|
![]() |
The
dimensions of the plug are very similar to those of the two-pole plug
for Class II apparatus known in Europe. The main difference is that the
pins, which are required for a correct seat in the Israeli socket, have
a diameter of 4 mm.
The test symbol must only be applied upon to the explicit approval of the authorities and is liable for costs. The components provided by us are tested, however, the test symbol is not applied.
Application will not cause any problems.
The test symbol must only be applied upon to the explicit approval of the authorities and is liable for costs. The components provided by us are tested, however, the test symbol is not applied.
Application will not cause any problems.